REPAIR AND REHABILITATION OF A FACULTY REFRIGERATOR

ABSTRACT
FLUSHING OF THE CONDENSER The refrigerant gas let into the condenser through the compressor and the vacuum pump was connected to the condenser to absorb dirty. REFILLING OF GAS INTO THE COMPRESSOR Gas was refilled into the compressor due to shortage of gas and it was filled inside the charging value and refrigerant. CHANGING OF DRIVER STRAINER DUE TO BLOCKAGE The driver strainer was change due to blockage with the help of oxygen and acetylene welding. SPRAYING OF THE FRIDGE The compressor was put on and the compressed air through the holes to the gun due to high pressure inside the tank. The air then forces the point out of the gun for spraying.
TABLE OF CONTENT Title Page Release Page Transmittal Page Approval Page Abstract Acknowledgement Dedications Table of content
CHAPTER ONE Introduction
CHAPTER TWO Literature Review
CHAPTER THREE Tools Used
CHAPTER FOUR Final Test and Sequence of Opera.
CHAPTER FIVE Conclusion Reference Appendix Two