Fabrication of a Portable Camp Bed

ABSTRACT In this project, three (3) alternative design solutions were considered for the camp-bed.  The authors utilize the local raw materials (with cost consideration) for the comments.  The merits and demerits of each of the alternative with respect to the considered grip were also discussed and the solutions of the alternatives that best satisfied the limitations were selection, design and cost analysis, production process and operations maintenance and problem encountered during the design were also included.

TABLE OF CONTENTSTitle            iLetter of Transmission        iiSignature Page          iiiApproval Page          ivRelease Page          vDedication          viAcknowledgement         viiAbstract           viiiTable of Content         ix
CHAPTER ONE1.1 INTRODUCTION        11.2 Limitation of Existing Camp-Bed     11.3 Design Specification of the Camp-Bed    2
CHAPTER TWO2.0 LITERATURE REVIEW       32.1 Component Parts of the Camp-Bed     42.2 The Half Inches Square Pipe      42.3 The Catcher          52.4 The Cover          52.5 The Angle Iron         5
CHAPTER THREE1.0 Design Solution        63.1 Comparison of Alternative and Choice     73.2 Alternative A         73.3 Thin Plank (Wood) and Foam Matters with ND Head Adjustment        73.4 Alternative B         83.5 Iron to Iron Camp-Bed       83.6 Alternative C         83.7 Matters (Form Alone) with Head Adjustment   8
CHAPTER FOUR4.0 Material Selection        104.1 Mild Steel          104.2 Codes and Standards        114.3 Designs Selection and Analysis      124.4 Analysis of Parts of the Chosen Alternative    124.5 Analysis of How Design Fired with Factors   13CHAPTER FIVEDescription of Camp Bed        15
CHAPTER SIXConstruction Procedure        16
CHAPTER SEVEN7.0 Testing and Costing        197.1 Testing of the Prototype         19 7.2 Free Body Diagram Driving Testing     19 7.3 Costing of the Prototype        207.4 Machine Cost Analysis        21CHAPTER EIGHT    Evaluation and Presentation        22 References 
INTRODUCTIONCamp-bed is used universally for relaxation, emergency cases such as war, and several other purposes.  The acknowledgement of these resources eventually reads to the fabrication of the camp-bed.  All existing camp beds have almost the same dimension but differ in design.  Some use rope and ailment while the modern design makes use of mood and spring.
The design and workshop technology, Engineering drawing, work experience gained after year one of study of this programme.