Design And Construction Of A Car Door Using Fibre Reinforced Plastic Composite

ABSTRACT Among various efforts pursued to produce fuel efficient vehicles, light weight engineering (i.e. the use of low-density structurally-efficient materials, the application of advanced manufacturing and joining technologies and the design of highly-integrated, multi-functional components/sub-assemblies) plays a prominent role. In the present work, a composite automotive design methodology has been presented and subsequently applied to the development and assembly of the inner and outer skeletons of a light weight composite Toyota Camry door panel. The door design has been specifically considered with respect to its weight while meeting the requirements /constraints pertaining to the structural and ascetic performances, crashworthiness, durability and manufacturability. In the lamination procedure, the number and orientation of the composite plies, the local laminate thickness and the shape of different door panel segments (each characterized by a given composite-lay-up architecture and uniform ply thicknesses) are used as design variables. The methodology developed in the present work is subsequently used to carry out the lamination and assembly of the front door on Toyota Camry vehicle, model year 2001(more specifically, to the inner and outer skeletons of the door panels). The emphasis in the present work is placed on highlighting the scientific and engineering issues accompanying composite door lamination and assembly design, and less on the outcome of such process and the materials resources/architecture needed to support such activity.
TABLE OF CONTENTS Title page           Approval Page           Dedication           Acknowledgement        Abstract        Table of contents         CHAPTER ONE Introduction 1.1 Background         1.2 Specification of Problem       1.3 Objectives of Work        1.4 Scope of the study        1.5 The necessity of the project       1.6 The need for the project       1.7 The benefits of using Fibre reinforced plastic composite  1.8 Purpose of the project        CHAPTER TWO Literature review 2.1 Historical background         2.2 Materials for laminated automotive parts     2.3 Common terms and their meanings     2.3.1 Composite materials      2.3.2 Fibre reinforced plastic(FRP)     2.3.3 Computer Aided Engineering (CAE)    2.3.4 Noise Vibration Harshness (NVH)   
CHAPTER THREE AutoCAD Design and computational procedure 3.1 Design Requirements of the car door     3.2 Geometrical model of the car door     3.3 Performance requirements for the car door    3.3.1 Structural performance requirements    3.3.2 Noise Vibrations Harshness (NVH) Requirements  3.3.3 Crashworthiness       3.3.4 Durability requirements      3.3.5 Manufacturing requirements     3.4 Design optimization of the car door     3.4.1 Conceptual-design optimization step    3.4.2 Detailed design optimization step    3.4.3 Optimization and parameter study   
CHAPTER FOUR Materials and Methods 4.1 Material uses         4.2 Manufacturing procedures       4.2.1 Laminating of moulding      4.2.2 Assembly and joining inner and outer skin skeleton 
CHAPTER FIVE Validation and weight characterization 5.1 Validation testing         5.2 Design verification        5.3 Weight evaluation       
CHAPTER SIX Recommendation and Conclusions 6.1 Recommendations        6.2 Summary and Conclusion       References