CONSTRUCTION OF PORTABLE WHEEL-BARROW

ABSTRACT After detailed study on machines and levers, the construction work started as follows:- Making out, pattern development, cutting filling, drilling, machining, assembling, welding and finishing.  Detailed procedures carried out is located at the sequence of operation in subsequent pages.
The machine has scale of 1:5 in all parts of its dimensions.  However, brief dimensions are given below:- Upper surface of bowl-850mm Inner surface of bowl-335mm Stand height-325mm Diameter of wheel-250mm Diameter of shaft seating and the shaft4mm Thickness of type-75mm
The drawing of the project was done and enclosed at the end page of this booklet.  At last, a 150kg capacity of conveying machine was constructed.   
TABLE OF CONTENTS Title pages Title page Approval page Dedication page Acknowledgment page Abstract
CHAPTER ONE Introduction Historical background 1.2Need for constructing the machine
CHAPTER TWO  THEORY/LITERATURE SURVEY 2.1Types of load to be carried by the conveyor 2.2Operation of the wheel-barrow
CHAPTER THREE 3.1Equipments/tools employed during construction of the wheel-barrow 3.2Materials of construction 3.3Construction procedure 3.4Sequence of operation 3.5Design calculations  3.6Calculations basic on the bowl 3.7Specifications 3.8Project drawing
CHAPTER FOUR COSTING OF PORTABLE WHEEL-BARROW 4.1Material cost analysis 4.2Labour cost analysis 4.3Miscellaneous costs Total cost  
CHAPTER FIVE 5.1Discussion 5.2Precautions taken during construction  5.3Cautions to users  5.4Recommendations 5.5Conclusions References