CONSTRUCTION OF FLOW NOZZLE

ABSTRACT
The project title “fabrication of flow nozzle†was done by a selected group of Engineering Students and the practiced objective (aim) of the project was centered on constructing a nozzle that is capable of transporting fluid from one to the other, to determine the charge in velocity of the moving fluid across two given areas of the nozzle and to be able to measure the quantity of fluid that will flow through the nozzle for a given period of time. However, the construction of the nozzle was done with materials obtainable locally and the science of operation carried out in constructing the nozzle was; cleaning, marking out, cutting off, drilling, folding, centre punching, assembling, welding, filling, testing and painting.  The flow nozzle was constructed based on the following specifications and dimensions; Throat Diameter60mm The diameter of the duct pipe 140mm The length of the up stream pipe 200mm The thickness of the nozzle3.8mm The length of the down stream pipe 200mm The height of the nozzle820mm The length of the nozzle690mm The size of the pressure valves½ inch Furthermore, the selection of materials for the construction of this flow nozzle was based on the factors which includes; ductility, malleability, fabricability, mechanical strength and stability, availability, corrosion resistance and lastly cost factor. Finally, the constructed flow nozzle and all other expenses cost N8,000.

TABLE OF CONTENTS
Title page Approval page Letter of transmittal Dedication Acknowledgement  Table of contents Abstract
CHAPTER ONE 1.0Introduction 1.1Definition of flow nozzle 1.2History of metering devices 1.3The scope of the project
CHAPTER TWO 2.0Literature review 2.1Theory of flow nozzle 2.2The characteristics of the nozzle 2.3Types of flow nozzle 2.4Advantages of flow nozzle 2.5Disadvantages of flow nozzle 2.6The uses of flow nozzle
CHAPTER THREE 3.0The method of construction
CHAPTER FOUR 4.0The Method Of Construction
CHAPTER FIVE 5.0Discussion 5.1Costing analysis
CHAPTER SIX 5.0Conclusion
CHAPTER SEVEN 7.0Recommendation References Nomenclature Appendices