Engineering

Corrosion Studies of Mild Steel in Biodiesel Obtained from Ghee Butter (Mann Shanu)

Abstract It is of no doubt that one day, fossil fuels, which the whole world high

Simulated Design for the Removal & Recycling of Acid Gases from Natural Gas

Natural gas is one of the major sources of fuel and raw material to industries al

Production of Biodiesel from Cultivated microalgea on municipal waste water

Cultivation of microalgae on municipal waste water  Extraction of the oil from th

BASIC LUBRICATION PRINCIPLE

This write-up gives an overview of lubrication, lubricants, their types and gener

QUALITY ASSESSMENT OF DRINKING WATER SOURCES (STUDY OF OLOWOTEDO COMMUNITY, OGUN STATE)

ABSTRACT The study aimed to assess the quality of drinking water in Olowotedo com

Energy Audit, Optimisation and Management of Liquefied Natural Gas Plants with Renewable Energy Resources Around the Plant: A Case Study of Brass LNG, Brass Island, Nigeria

The energy generation and power consuming loads at Brass LNG facility located in

EFFECTIVENESS OF PORTSMOUTH HIGHWAYS PRIVATE FINANCE INITIATIVES (PFI) SCHEME

Since the inception of the Private Finance Initiatives (PFI) in the United Kingdo

THE CONSTRUCTION OF A 2KVA AUTOMATIC VOLTAGE REGULATOR

ABSTRACT The AVR is automatic voltage regulator and it is a device which is used

THE CONSTRUCTION OF AUTOMATIC VOLTAGE INVERTER AND A BATTERY CHARGER

ABSTRACT   Automatic voltage inverter is an important area in power system engine

SIMULATION OF REACTIVE POWER CONTROL IN AC TRANSMISSION SYSTEMS USING STATIC VAR COMPENSATOR

Voltage stability is a major concern when planning and operating electrical power

DESIGN OF 2TONNES AUTOMATED HYDRAULIC JACK

ABSTRACT The design of 2 tones automated hydraulic jack was carried out using the

SUSTAINABLE E-LEARNING FOR NIGERIAN EDUCATIONAL DEVELOPMENT

ABSTRACT As Nigeria aims at optimizing the implementation of the E-learning progr

PRESSURE TRANSIENT ANALYSIS IN GAS RESERVOIRS (PSEUDOPRESSURE APPROACH - A NEW APPROACH)

The ability to analyse the performance and forecast the production of gas wells i

Physico-Chemical Analysis of Some Wells and Streams in North Bank, Makurdi, Benue State

Civil Engineering

THE IMPERATIVE OF ENGAGING PROFESSIONAL BUILDERS IN BUILDING CONSTRUCTION WORKS

Time has come for people to know the implications of engaging non-professional bu

Energetic and Exergetic analysis of waste heat recovery system in sulphur acid using organic Rankine cycle.

The continuous search for sustainable alternative energy to non renewable energy

Evaluation of Guinea Corn Husk Ash As Oil-Well Cement Slurry Extender

The objective of primary cementing operation is to provide zonal isolation while

Remediation of Soil Contaminated with Diesel Using an Anionic Surfactant (LAS) as an agent. (2)

Environmental pollution as a result of drilling and mining activities in areas wh

DESIGN AND CONSTRUCTION OF A SELF FEEDING CASSAVA GRATING MACHINE

This project seek to modify the existing cassava grating machine to make it to be

Development of Autonomous Lawn Mower from Locally Sourced Materials

A lawnmower is a machine that uses a revolving blade or blades to cut a lawn gras

INVESTIGATION OF CRUSHABILITY OF CONCRETE OF DIFFERENT GRANITE AGGREGATE SIZES USING IMPACT TEST

TABLE OF CONTENT TITLE                                                           

Purification of Water Using a Plastic Bio-Sand Filter

Plastic bio-sand filter is a prototype of a slow sand filter which purifies water

CHARACTERIZATION OF NON-EDIBLE OIL FROM WASTE PLANT MATERIALS FOR BIOIDIESEL PRODUCTION

Oil obtained from orange peels and velvet tamarind nut by solvent extraction (n-h

DEVELOPMENT OF A SOLAR POWERED CAR

ABSTRACT: This project work is on the development of a solar powered car. It invo

GLOBALIZATION OF INFORMATION AND COMMUNICATION TECHNOLOGY

TABLE OF CONTENT  APPROVAL PAGE………………………………………… II DEDICATION………………………………………………….

Design and fabrication of a PET (Polyethylene terephthalate) crushing machine.

Due to the need for recycling Polyethylene terephthalate (PET or PETE) materials,

Maintenance, supervision and inspection at a water treatment plant.

Clean and potable water is one of the basic infrastructures any responsible gover

DESIGN OF SEDIMENTATION TANK TO RESUSCITATE PHYTOREMEDIATION IN OVERLOADED OBAFEMI AWOLOWO SEWAGE TREATMENT PLANT

The discharge of raw sewage or improperly treated sewage into water bodies has al

Comparative Assessment of Rice Husk Ash, Powdered Glass and Cement as Lateritic Soil Stabilizers

COMPARATIVE ASSESSMENT OF RICE HUSK ASH, POWDERED GLASS AND CEMENT AS LATERITIC S

Design and Fabrication of journal Bearing Testing Rig

ABSTRACT This project work deals with the design and fabrication of a suitable jo