Materials and Metallurgical Engineering
148 works in Materials and Metallurgical Engineering
Comparative investigation of the effect of selected natural polymers on the efficiency of load bearing Thread Lockers
Abstract In this research, comparative investigation of the effect of selected na
Isothermal oxidation performance of Laser Cladding Assisted with Preheat (LCAP) tribaloy T-800 composite coatings deposited on EN8
Abstract: It is anticipated that laser cladding assisted with preheat (LCAP)-depo
Characterization of copper slag for beneficiation of iron and copper
Abstract: Before disposal of any metallurgical waste to the environment, it is th
Surface integrity of TiC thin film produced by RF magnetron sputtering
Abstract: Surface structure determines the performance of materials in service. E
Effect of ball and feed particle size distribution on the milling efficiency of a ball mill: an attainable region approach
Abstract: In this article, alternative forms of optimizing the milling efficiency
COMPARATIVE ANALYSIS OF THE EFFECT OF ANTISOLVENTS OF TOLUENE DMF AND DMSO ON THE STABILITY OF PEROVSKITES SOLAR CELLS
This research work delves into a comparative analysis of Perovskite solar cells c
An attainable region approach for the recovery of iron and zinc from electric arc furnace dust
Abstract: This study investigated the application of the attainable region optimi
A review of ironmaking by direct reduction processes: quality requirements and sustainability
Abstract: Currently the majority of the world’s steel is produced through either
Enhancing the flotation recovery of copper minerals in smelter slags from Namibia prior to disposal
Abstract: amibia Custom Smelters (NCS) process a range of copper concentrates in
Tribological and microstructural investigation of hybrid AA8011/ZrB2-Si3N4 nanomaterials for service life improvement
Abstract: The effect of ZrB2-Si3N4 particle reinforcement on the tribological beh
Structural and morphological dataset for rfsputtered WC-Co thin films using synchrotron radiation methods
Abstract: Control and manipulation of synthesis parameters of thin film coatings
Application of attainable region technique to optimize copper slag’s desired size class
Abstract: Copper slag is a hard material produced from smelting copper-bearing or
Spark plasma sintering of alumina reinforced with tungsten carbide-cobalt systems
Abstract: Alumina-based ceramic composites have attracted many research interests
Thermodynamics and kinetic study of metal adsorption on coal fly ash based on a binary mixture of copper and nickel
Abstract: The main purpose of this investigation was to study the potential appli
Environmental and socioeconomic impact of copper slag—A review
Abstract: Copper slag is generated when copper and nickel ores are recovered from
The effect of a sulphate-reducing bacteria on the rate of corrosion of steel alloys
Abstract: In this article, we investigate the effect of micro-organisms on the ra
Optical properties of bimetallic (SrO-K2O) nanofillers
Abstract: In this study, bimetallic nanofiller capable of usage as reinforcement
Development and size distribution of Polystyrene/ZnO nanofillers
Abstract: In this paper, the preparation and characterization of ZnO nanofillers
Influence of nanocrystalline nickel powder on oxidation resistance of spark plasma sintered Ni-17Cr6.5Co1.2Mo6Al4W7.6Ta alloy
Abstract: An investigation was carried out to evaluate the isothermal oxidation b
Suitability of Owoh Clay for the Production of Ceramics and Other Industrial Products
The suitability of Owoh clay for the production of ceramics and other industrial
The Impact of Highway Design and Construction Practice Defect on the Safety of Nigeria Roads
ABSTRACT Safety on Nigeria roads has become a thing of concern in recent times. T
Production of Lead-Acid Battery
ABSTRACT This project titled “the production of lead-acid battery” for the produc
FABRICATION AND PERFORMANCE ASSESSMENT OF ECOFRIENDLY BRAKE PAD USING PALM KERNEL SHELL
The fabrication and performance assessment of eco-friendly brake pad using palm k
CHARACTERIZATION STUDIES OF EZENIFITE CLAY FOR ENGINEERING AND INDUSTRIAL APPLICATION
The characterization of Ezinifite clay from Anambra State, Nigeria, is presented
Investigating the Degradation of Epoxy Resin Nanocomposite Exposed to Different Environments
Epoxy nanocomposites have found their path through a wide range of applications i
Development and Evaluation of the Optical Properties of Optical Glass Produced from Otamiri Silica Sand
ABSTRACT This work investigates the optical properties of glass prepared using Ot
Mechanical and Microstructural Analysis of Equal Channel Angular Pressing of Almg3 Alloy with Additional 30o Twist Angle
ABSTRACT Equal channel angular pressing (ECAP) has over the years been used as a
Synthesis and Characterization of Tin Iv Oxide (Sno2) Nanoparticles for Energy Applications
ABSTRACT Electrochemical capacitors (ECs) or Super capacitors (SCs) are energy sa
Engineering Characterization of Agbani Clay Deposit as Refractory Material for Furnace Lining
The Engineering Characterization of Agbani clay deposits has been investigated wi
Investigation of Industrial potential of Amechi Idodo Clay Deposit in Enugu State
The Clay deposits has been investigated for its industrial potentials. The chemi