Engineering

3503 works in Engineering

Investigation Of Peo-Polymer Blend Electrolytes For Electrochemical Capacitors

ABSTRACT Recently, there has been a drift of attention towards gel polymer based

Controlled Release Of Fungicidal Antimicrobials On Packaged Foods

ABSTRACT This paper presents the effect of polymer concentration on the release o

Theoretical Analysis Of Gravity-Controlled Waterfloods

ABSTRACT The concept of dumpflooding is to flow water from a high pressure aquife

Modeling Of Cold Welding And Lamination Of Organic And Hybrid Organic /Inorganic Structures

Abstract This research work presents the results of analytical studies of effects

Pressure Transient Analysis Of Hydraulically Fractured Wells In Multilayered Reservoirs

ABSTRACT New equations for bilinear, formation linear and pseudo-radial flow regi

Cell Surface Interaction On A Multi - Scale

ABSTRACT The increasing rate of cancer patients worldwide, and especially Africa

Techno-Economic Feasibility Of Ethane Based Enhanced Oil Recovery In Nigeria (Case Study: Niger Delta)

ABSTRACT Increasing oil recovery has been one of the issues enlisted for attentio

Identification Of Closed Perforations And Damaged Sections Of Horizontal Wells In Naturally Fractured Reservoirs, Using Well Test Analysis

ABSTRACT The use of horizontal wells with zonal isolations is a common completion

Biodegradation And Recycling Of Polyethylene Into Composite Building Materials

Abstract This work presents the results of experimental and theoretical studies o

Application Of Minimum Curvature Method To Wellpath Calculations

ABSTRACT A major drawback of directional and horizontal well drilling is the nume

Pressure Transient Analysis Of Bingham Fluids Using Tiab’s Direct Synthesis Approach

ABSTRACT This study investigated transient flow response of heavy oil that exhibi

Optimizing Field Performance Using Injection Efficiency From Streamline-Based Workflow

ABSTRACT Waterflooding is one of the most common secondary recovery mechanisms av

Bioinspired Design

Abstract Bioinspired design involves the use of concepts observed in natural biol

Transient Analysis And Performance Prediction Of Passive Cooling Of Buildings Using Long Wave Nocturnal Radiation In Owerri, Nigeria

ABSTRACT Transient analysis and performance prediction of passive cooling of buil

Effect Of Pipe Inclination Angle On Gas–Liquid Flow Using Electrical Capacitance Tomography (Ect) Data

ABSTRACT Pipes that make up oil and gas wells are not vertical but could be incli

Transient Stability Analysis Of Nigeria Power System: Multimachine Approach

ABSTRACT  The recent power sector reform in Nigeria has thrown up enormous challe

Use Of Local Clays For The Production Of Porcelain Pin Insulators

ABSTRACT   The use of local clays for the production of porcelain pin insulators

A Review Of The Rheological Effects Of Power Law Drilling Fluids On Cuttings Transportation In Non-Vertical Boreholes

ABSTRACT Cuttings transportation during in non-vertical boreholes is necessary fo

Morphology Analysis Of Lead Iodide- And Lead Acetatebased Perovskite Layers For Solar Cell Application

ABSTRACT Organolead trihalide perovskite solar cells have shown success as light

Implications Of Production Decline Patterns, Cost Depreciation Methods And Fiscal Regimes On Offshore Profitability In Nigeria

ABSTRACT Upstream petroleum industry remains one of the most prolific industries

Effect Of Cooling Rate And Modification On The Microstructure And Tensile Properties Of Al-Si-Mg Alloy

ABSTRACT  The effect of cooling rate and modification on the microstructure and t

Temperature Prediction Model For Flowing Distribution In Wellbores And Pipelines

ABSTRACT Down-hole temperature and pressure data are important information needed

Economic Analysis And Application Of Single Point Gas Lift Systems For Marginal Fields Of The Niger Delta

ABSTRACT    The purpose of this study is to develop an innovative technique for o

Genetic Units Based Reservoir Characterization Using A Normalized Pore Throat Radius For The Clastic System: Niger Delta As Field Case Study

Abstract Globally, 30–50% of hydrocarbon volumes in silici-clastic reservoirs are

Dynamic Analysis Of Induction Machine Connected To Infinite Bus-Bar

ABSTRACT    The dynamic simulation is one of the key steps in the validation of t

Optical And Electrical Characterisation Of P3HT:PCBM Organic Photovoltaic Devices

BACKGROUND The numerous limitations of inorganic solar cells has led to keen inte

Application Of Tiab’s Direct Synthesis Technique To Injectivity And Falloff Pressure Transient Test Under Non-Isothermal Condition

ABSTRACT In this study, we present a new analytical solution method that accurate

Assessment Of Barite Deposit In Nassarawa State For Oil Drilling Application

ABSTRACT Drilling fluids play sophisticated roles in the drilling process which i

Integrated Reservoir Characterization: A Case Study Of An Onshore Reservoir In Niger Delta Basin

ABSTRACT Reservoir characterization has long been identified as the ultimate proc

Dimensional And Regression Models Of Rainfall Intensity-Frequency Relations

ABSTRACT  In the design of flood control structures, there is need for rainfall i